placeholder

q

$0.00

Category:



    (Pant & Jacket Vents, Inside Sleeve Cuffs & Jacket Skirt Trim)




    CUSTOM SIZE ADJUSTMENTS

    Please select the inches, if you want to adjust (+/-) in "Sleeve cuff to Sleeve Cuff", "Jacket Height" or "Pant Height" other than Standard size displayed on the Size Chart page.
    (More than a limit of Jacket Height increases the weight of the parcel and ultimately increases the Shipping cost.)
    Refer to our Custom Gi Guide page for more details.


    • LARGER or SPECIAL SIZING

    EXISTING GI DIMENSIONS

    Layout your existing Gi that you like the fit of you, on a flat surface and with a tailor’s measuring tape record and fill the dimension values.
    Refer to our Custom Gi Guide page for more details.

    JACKET SIZING

    Sleeve length as measured from left to right.

    As measured from the BOTTOM or base of the collar, down to the skirt end.

    As measured from left to right from under the armpit to the other side.

    How wide the sleeve will be at the shoulder as measured from top to bottom.

    As measure at the cuff from the top to bottom. Usually, it is tapered down a bit when compared to the shoulder width.

    This is the slit at the base of the jacket on either side. Measure from top to bottom.

    PANTS SIZING

    As measured from the waist of the pants down to the bottom cuff of the pants.

    As measured from left to right at the cuff location.

    As measured from left to right at the top of the pants.

    As measured from left to right at the thigh.

    As measured from the top of the pants down to how deep you want the crotch depth to be.

    BODY MEASUREMENT DIEMENSIONS

    Now you can just order a BJJ Gi With Fully Custom Dimensional Options
    This will allow you to build and design a Gi that is more tailored to your body than what other companies offer today. It will require you to have some measuring tape on hand so that exact measurements can be taken.
    We will make allowances for your provided measurements using sophisticated sizing technology to ensure build a perfect Custom Gi fit.
    Refer to our Custom Gi Guide page for more details.

    FOR JACKET SIZING

    Have your arms extended out like an airplane. Measure from 2nd Knuckle Across the Back To The Other Second Knuckle.

    Measured from the BOTTOM or base of the collar, down to the skirt end.

    Measure the circumference of your chest, puffed out as much as possible.

    Measure the circumference of the waistline (tummy), above the belly button.

    Measure the circumference of your bicep while it is flexed.

    FOR PANT SIZING

    Measure from where you wear your pants down to the base of your ankle bone.

    Measure the circumference of the waist where you tie up the pant.

    Measure the circumference of the thickest part of your thigh.

    Loosely measure from where you wear your pants in the front, under your crotch to the same position on the other side.


    BODY TYPE INFORMATION

    Let us know your height in inches.

    Let us know your weight in pounds.

    Please describe your body type

    Please Upload Image For Sublimation of Rashguard Lining (Make Sure to Upload High Resolution Image)

    • (max file size 2 MB)

    Please upload the best quality image/file you have (at least 1000x1000 pixels at 300 DPI).

    • (max file size 2 MB)


    If you would like a different font than what is available, please go to DaFont.com or Google Fonts and provide us a link or name of the font you would like to use by using the "Alternate Font" field below. However, please use one of the default fonts to place its location.
    Words Height (Inches) <= 10

    Please upload the best quality image/file you have (at least 1000x1000 pixels at 300 DPI).

    • (max file size 2 MB)


    If you would like a different font than what is available, please go to DaFont.com or Google Fonts and provide us a link or name of the font you would like to use by using the "Alternate Font" field below. However, please use one of the default fonts to place its location.
    Words Height (Inches) <= 10


    Please add any instruction regarding Embroidery.

    • More Custom Embroideries

    If you desired to put extra custom embroideries on your Gi. You may write the detail of locations and sizes with upload the images file of your artwork or E-mail us at support@shapesfightwears.com. We will technically examine your requirements and email you the total completion time with a separate invoice.

    Please upload the best quality images/file you have (at least 1000x1000 pixels at 300 DPI).

    • (max file size 2 MB)
    • $


    • Belt Custom Embroidery

    If you would like a different font than what is available, please go to DaFont.com or Google Fonts and provide us a link or name of the font to the field you would like to use by selecting the "Alternate Font" option below. However, please use one of the default fonts to place its location.

    Words Height (Inches) <= 1.25

    • $



    • (max file size 2 MB)

    Please upload the best quality image/file you have. For Vector files please send us an email to sales@shapesfightwears.com with the attached vector file (.cdr, .ai, .eps, .svg, .pdf) or attach below a high-resolution bitmap raster file (.jpg, .png, .tiff) at least 1000x1000 pixels at 300 DPI.

    • $

    If you would like a different font than what is available, please go to DaFont.com or Google Fonts and provide us a link or name of the font to the field you would like to use by selecting the "Alternate Font" option below. However, please use one of the default fonts to place its location.

    Words Height (Inches) <= 1.25 :

    • $


    • (max file size 2 MB)
    Please upload the best quality image/file you have. For Vector files please send us an email to sales@shapesfightwears.com with the attached vector file (.cdr, .ai, .eps, .svg, .pdf) or attach below a high-resolution bitmap raster file (.jpg, .png, .tiff) at least 1000x1000 pixels at 300 DPI.

    • $

    Please leave any special instructions about your order.

    PLEASE READ THE TERMS BELOW

    Because this is a unique custom order, I UNDERSTAND AND ACCEPT, that I am responsible for the fit of the gi from the dimensions I have provided. I also have read the Custom Gi Guide and understand how to measure for my custom gi.

    I also UNDERSTAND AND ACCEPT, that our general delivery guideline is about 15 business days or less from the date of the order. Delivery times around the winter holidays may also affect the delivery date for which Shapes Fightwear does not have any control over.

    • I accept terms and conditions

Descripción

sdfsdfsfasdasdasddsds

Reviews

There are no reviews yet.


Be the first to review “q”

You've just added this product to the cart:

en_USEN